Menu
Your Cart

Spare Nozzle Kit 2.0mm For H827

Spare Nozzle Kit 2.0mm For H827
Spare Nozzle Kit 2.0mm For H827
  • Stock: 35
  • Model: SG H827-3
  • Weight: 0.11kg
  • Dimensions: 150.00mm x 90.00mm x 38.00mm
  • SKU: SG H827-3
  • UPC: 6009515806170
AIRCRAFT AIRCRAFT
Based on 0 reviews. - Write a review
R 249.90
Ex VAT: R 217.30
For 15 or more items, click to quote
Add to Cart
Buy Now Question
Add to Wish List Compare this Product
Tags: Brand AIRCRAFT , Spares , SG H827 Spare , SG H827P Spare , Spare

AirCraft Spare Nozzle Kit 2.0mm SG-H827-3 For H827

At a Glance: 2.0mm nozzle set for the H827—made for high-flow applications where you need to move more material fast (coating and setup dependent).

The AirCraft SG-H827-3 Spare Nozzle Kit 2.0mm is a replacement nozzle set for the AirCraft H827 spray gun. The nozzle kit is the precision trio that decides whether your finish looks professional or painful: the needle, fluid nozzle and air cap meter material and atomise it into a controlled fan. As these parts wear, get scratched, or collect stubborn residue, the gun starts misbehaving—spitting, poor atomisation, uneven fan edges and dripping from a needle that no longer seals cleanly. A 2.0mm setup is typically chosen when you want very high material flow for heavier coatings or faster coverage (application dependent). Fit a fresh nozzle set and your H827 can deliver stronger flow with better consistency and cleaner shut-off.

Maximum Flow, Restored Control: the SG-H827-3 2.0mm Nozzle Set

High-flow spraying only works when the needle/nozzle seal properly and the air cap atomises consistently. Match the Cat No. SG-H827-3 to ensure correct fitment for your AirCraft H827.

Extra Information

  • Compatibility: Spare nozzle kit for AirCraft H827 spray gun.
  • When to replace: Persistent spray issues after cleaning, or visible damage/wear on needle/nozzle/air cap.
  • Coating prep: Strain and mix coatings correctly—thicker materials may need correct thinning and filtration.
  • Adjust your setup: A 2.0mm nozzle can deliver a lot of material—fine-tune fluid and pressure to avoid runs.

Pro Tip

  • With a 2.0mm nozzle, start with lower fluid and slightly higher movement speed, then adjust. It’s easier to add flow than to fix runs after the fact.

Features

  • Complete 2.0mm nozzle kit Replaces the main wear parts that control flow and spray pattern.
  • Very high-flow nozzle size Suitable where greater material delivery is required (coating dependent).
  • Precision spray components Needle/nozzle fit supports clean shut-off and consistent atomisation.
  • Designed for H827 Model-specific spare nozzle kit for correct compatibility.

Benefits

  • Restores spray performance: Helps eliminate spitting, rough atomisation and unstable fan edges.
  • Better shut-off: Fresh needle/nozzle contact helps reduce dripping and leakage.
  • Faster coverage potential: Higher flow can help on larger surfaces and heavier coats (application dependent).
  • Cost-effective maintenance: Replace wear parts instead of replacing the entire spray gun.

Safety

  • Spray in a well-ventilated area and wear suitable respiratory protection.
  • Wear eye protection and gloves when handling coatings and cleaning solvents.
  • Disconnect the air supply and release pressure before changing needle/nozzle/air cap parts.
  • Keep solvents and coatings away from open flames and heat sources.
  • Dispose of cleaning waste responsibly according to local regulations.

Specifications

Description Spec
BrandAirCraft
Cat No.SG-H827-3
Product TypeSpare Nozzle Kit (Needle/Nozzle/Air Cap Set)
Nozzle Size2.0mm
Compatible WithAirCraft H827 spray gun
FunctionControls coating flow, atomisation and spray pattern
Replacement UseDirect replacement by part number
Typical UseVery high-flow applications (coating and setup dependent)

Write a review

Bad Good
Captcha