Menu
Your Cart

Nozzle Kit 1.7mm For Sg Mp200 Spray Gun

Nozzle Kit 1.7mm For Sg Mp200 Spray Gun
Nozzle Kit 1.7mm For Sg Mp200 Spray Gun
  • Stock: 20
  • Model: SG MP200-01
  • Weight: 0.12kg
  • Dimensions: 175.00mm x 80.00mm x 80.00mm
  • SKU: SG MP200-01
  • UPC: 6009515860417
AIRCRAFT AIRCRAFT
Based on 0 reviews. - Write a review
R 495.90
Ex VAT: R 431.22
For 15 or more items, click to quote
Add to Cart
Buy Now Question
Add to Wish List Compare this Product
Tags: Brand AIRCRAFT , Spares , SG MP200 Spare , Spare , Nozzle Kit , 1.7mm Nozzle , Primer Spray Nozzle , Paint Spray Gun Parts

AirCraft Nozzle Kit 1.7mm For SG-MP200 Spray Gun (SG-MP200-01)

At a Glance: 1.7mm replacement nozzle kit for high-flow spraying and dependable coverage on the SG-MP200 spray gun

When a spray gun starts to sputter, pulse, leak, or lose its clean fan pattern, the nozzle set is usually where the problem begins. The AirCraft SG-MP200-01 Nozzle Kit (1.7mm) is a genuine replacement set for the SG-MP200 spray gun, designed to restore strong material flow, consistent atomisation, and reliable spray pattern control. A 1.7mm setup is a great match for higher-viscosity coatings and coverage-focused work—think primers, undercoats, and high-build materials—where a smaller nozzle can struggle and slow you down.

High-flow 1.7mm nozzle performance for primer and heavy coating work

Replacing worn nozzle components helps bring back proper sealing and stable spray behaviour. It’s a smart service part for keeping your SG-MP200 spraying cleanly and predictably, especially in busy workshop environments where downtime is expensive.

Extra Information

  • Always strain paint/primer before spraying—particles can damage the nozzle and ruin spray quality.
  • Use correct thinning and air pressure settings for your coating; high-build materials often need careful setup.
  • Clean the gun immediately after use to prevent dried material damaging the nozzle set.
  • After installation, test spray on cardboard to confirm fan shape and atomisation before spraying the final surface.

Pro Tip

  • For primers and high-build coatings, start with slightly higher pressure and a steady wet coat, then fine-tune down until the fan stays even without dry spray—consistent overlap is your best friend.

Features

  • 1.7mm Nozzle Size High-flow setup suited to primers and thicker coatings (with correct reduction).
  • SG-MP200 Compatibility Designed as a replacement nozzle kit for the AirCraft SG-MP200 spray gun.
  • Restores Spray Pattern Helps correct spitting, pulsing, and uneven fan patterns caused by wear or damage.
  • Service Replacement Part Ideal when cleaning no longer restores performance or after accidental damage.

Benefits

  • Better Coverage on Thicker Coatings: High-flow nozzle size supports faster build and steadier delivery.
  • Cleaner, More Predictable Results: Improves atomisation and spray pattern consistency.
  • Reduced Downtime: Quick replacement keeps the spray gun working without replacing the entire tool.
  • Improved Sealing: Fresh nozzle components help reduce leakage and pressure/flow inconsistency.

Safety

  • Wear eye protection and a respirator suitable for paint fumes, especially with solvent-based coatings.
  • Spray only in a well-ventilated area or suitable spray booth to reduce inhalation risk.
  • Shut off the air supply and depressurise the spray gun before disassembly or fitting parts.
  • Keep paints and thinners away from sparks, flames, and heat and follow the coating manufacturer’s safety instructions.
  • Wear chemical-resistant gloves when cleaning with thinners and wash hands after use.

Specifications

Description Spec
BrandAirCraft
Cat No.SG-MP200-01
Product TypeNozzle Kit
Nozzle Size1.7mm
Compatible ModelSG-MP200 Spray Gun
Typical UsePrimers, undercoats, high-build coatings, general coverage

Write a review

Bad Good
Captcha